first of all you need to have GNS3 or cisco packet tracer software on your pc (with a good configuration)
BEFORE STARTING NETWORKING One must know how to Give IP ADDRESSES ON THE INTERFACES.
Now open the GNS 3 or Cisco packet tracer and arrange the three (or as many u want) routers indicated as circular shape device in the following manner.Now connect all of them with a "Serial link" cable.
You have now arranged the devices.now its time to do some real work with commands.
Now enter the console of the router by double clicking on the router you wanted to configure.For example if u want to enter on router 1,just double click on it and the console window will be opened.
now just enter the follwing commands/codes on the respective routers.
and dats it, you have successfully configured the ip address.
refer to the snapshots for codes*.
BEFORE STARTING NETWORKING One must know how to Give IP ADDRESSES ON THE INTERFACES.
Now open the GNS 3 or Cisco packet tracer and arrange the three (or as many u want) routers indicated as circular shape device in the following manner.Now connect all of them with a "Serial link" cable.
You have now arranged the devices.now its time to do some real work with commands.
Now enter the console of the router by double clicking on the router you wanted to configure.For example if u want to enter on router 1,just double click on it and the console window will be opened.
now just enter the follwing commands/codes on the respective routers.
and dats it, you have successfully configured the ip address.
refer to the snapshots for codes*.
No comments:
Post a Comment